We get a lot of questions about our GutterGlue.
GutterGlue is the primary bonding system for fiberglass gutter.
GutterGlue is a 2 part methacrylate that has superior bonding properties.
GutterGlue is the consistency of toothpaste when it comes out of the tube. This is helpful in keeping a clean work area.
GutterGlue can be used for seams, miters, endcaps and outlets. It is packaged with Glue, Kevlar Tape (2), Mixing Tips (3), Tongue Depressors (3), 60 Grit Sandpaper and installation instructions.
GutterGlue can be used in temperatures as low as 32 degrees. The warmer it is the faster it will cure.
GutterGlue requires a 220ml Applicator Gun which is sold separately.
If you make a bad cut and you need to fill the gaps it works great and sands well.
If you apply GutterGlue to a visible area you can very easily touch it up while it is still curing with acetone and a rag.
Any bonding surface requires sanding before applying GutterGlue.
The Kevlar Tape for Miters and Seams can handle over 600 lbs per sq in.
Always wear proper safety equipment when handling.
For more information please visit
https://fibergutter.com/products/